Do you need commercial or residential sewer pipe repair? In the past, the only way was to dig the pipes up and replace the damaged sections. This caused a huge mess and disruption to your home and business. Therefore, before you call a local plumber who can traditionally repair the problem, consider the pipe relining technique. Get expert from a reputed pipe relining Melbourne company to do the job. The traditional method requires digging while pipe relining has several advantages as shown below:

Why choose pipe relining?

– Less Intensive

The process of pipe relining is relatively less intensive than other conventional methods. The traditional techniques of sewer pipe repair were digging and excavation while the pipe relining method has no such requirement. This translates to no interruptions between replacements and avoids damaging the landscape.

– Less cost

Pipe relining saves costs, as there is no digging required, which cuts down on labour costs. In addition to that, there is no need to fix your damaged landscape, and the materials used to reline the piping are much less expensive.

– Pipe relining ensure durability

Relining pipes are incredibly durable. The very nature of the process provides this. With it, the old pipe is not replaced; instead, it is used as a guide where the new tubing is inserted, and then inflated, and this creates a pipe within a pipe or double protection. Relined pipes are stronger than the original pipe, and sometimes last up to 40 years.

– Time-Saving

As there is no digging or pipe replacement, pipe relining consumes very little time. The time efficacy is of such magnitude that the work can be done in a day in comparison with the weeks it takes by the traditional method.

– Patch Repair

In the traditional method, if a section of the pipe is damaged, then the whole pipe has to be replaced. The right joints and fittings are required. However, in the pipe relining technique, only the damaged section can be reinforced with this technique. This reduces cost, time, and labour effort.

How is Pipe Relining done?

– The pipe damage is assessed by inserting an in-drain camera. This will accurately locate the source of the problem.

– Any blockages that are found are cleared often by use of water jet.

– Then the damaged part is measured. This measurement is used to cut the drain lining. The lining is soaked in a two-part resin for a while. It is then inserted into the pipe and inflated to take the shape of the drain and left to harden.

– Once the resin is hardened and cured, the inflated bladder can be removed.

– A final camera inspection is done, to check if the ‘drain within the drain’ is intact and there is 100% leak proofing done. Also, it has to be ensured that there are no tree root intrusions.

Hopefully, this post provided the necessary information about pipe relining. Always choose the experts to do the job, as this will ensure quality and durability.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *